“Had an issue with my furnace, not running correctly and I thought it was short cycling so I called Bear Creek after having another HVAC contractor looked at it. Charge me $150 and didn't really fix the problem. The owner Kevin showed up and was able to identify the issue had a short-term fix until we could get it fixed. Kevin was very knowledgeable and a nice guy and didn't even me for the short term solution. I would strongly recommend him!”
Heat Pump Replacement in Edgewater, Colorado
- EPA Section 608 Certified
All technicians certified in refrigerant handling and system testing
- Old Unit Removal Included
Complete removal and disposal of your existing heat pump system
- Compact Home Specialists
Experience with space-efficient systems for Jefferson County properties
“Where can I start? Kevin is extremely responsive and knowledgeable. Prices are also reasonable for the quality of work performed. I had an emergency leak in my basement today (had a flight to catch in a couple of hours) and denver water was taking too long to shut the water off in the house. Kevin took time out of his day off to stop by my house and temporarily fix the leak so I could make my flight later that day! The professionalism is unmatched! I will be using Kevin and his team on all sorts of projects going forward. Can’t recommend highly enough!”
“Kevin and his team came into my old moutain home and helped me install a new tankless water heater and a new furnace. They ran into all sorts of unknowns at the house, my well line started leaking into basement and it was just the tip of the iceberg. Kevin stayed numerous days helping me fight problems that were not even part of his installation. He is one who you can say will have your back through thick n thin! He sticks to what he says, where most people would try to stick it to you for unseen work.. His instalation was very thorough and he made sure I was happy before he left. l sure appreciate you helping me fight the fight with courage and leadership. Thank you Kevin and Team A+++”
What We Do
Heat pump replacement that helps Edgewater homeowners eliminate frequent breakdowns and high energy bills
Covering old unit removal, electrical integration, refrigerant line connections, and performance testing to verify heating and cooling capacity in Colorado's climate
Like-for-Like Replacement
Direct swap with compatible new model including old unit removal and testing
Upgrade Replacement
Variable-capacity heat pump with smart thermostat integration for better efficiency
Why Us
Variable-capacity systems tested for cold snap performance
When a 20-year-old heat pump breaks down repeatedly, repair costs climb toward replacement price while energy bills stay high. The wrong replacement decision means overpaying upfront or getting stuck with another inefficient system.
Common Challenges
Frequent breakdowns drain savings
Older units fail repeatedly, with each repair costing $300-800 while efficiency drops
Repair costs approach replacement price
When repair quotes exceed 50% of replacement cost, you're paying twice for the same problem
Outdated models lack smart controls
20-year-old systems can't integrate with modern thermostats or zoning controls
How We Help
Variable-capacity compressors cut bills
Modern units modulate output 25-100% vs old single-speed on/off cycling, reducing energy waste
Cold snap heating down to -15°F
New heat pumps maintain capacity in Edgewater's cold snaps without backup resistance heat
Smart thermostat integration included
WiFi-enabled controls let you adjust temperature remotely and track energy usage
Old unit removal and disposal
Complete teardown of existing system including refrigerant recovery and equipment haul-away
Performance testing verifies capacity
Post-install testing confirms heating and cooling output matches manufacturer specs
Variable-capacity compressors cut bills
Modern units modulate output 25-100% vs old single-speed on/off cycling, reducing energy waste
Cold snap heating down to -15°F
New heat pumps maintain capacity in Edgewater's cold snaps without backup resistance heat
Smart thermostat integration included
WiFi-enabled controls let you adjust temperature remotely and track energy usage
Old unit removal and disposal
Complete teardown of existing system including refrigerant recovery and equipment haul-away
Performance testing verifies capacity
Post-install testing confirms heating and cooling output matches manufacturer specs
Who We Help
Edgewater homeowners ready to replace aging heat pumps
Whether your system is 20 years old or repair costs just exceeded half the replacement price, we arrange certified technicians for like-for-like or upgrade replacement.
Homeowners with 15-20 Year Old Units
Compact residential properties where frequent breakdowns signal it's time to replace before winter
Homeowners Facing High Repair Quotes
When repair costs exceed $2,500 and the unit is over 10 years old, replacement makes financial sense
Homeowners Upgrading to Variable-Capacity
Replacing single-speed systems with modern units that modulate output for better efficiency
Homeowners Preparing to Sell
Replacing aging HVAC before listing increases home value and buyer confidence
How We Work
How Heat Pump Replacement Works
From assessment to performance testing, we arrange certified technicians who handle every step of your heat pump replacement in Edgewater.
System Assessment
Technician evaluates your existing unit, ductwork, and electrical to recommend like-for-like or upgrade options
Old Unit Removal
Complete teardown including refrigerant recovery, disconnect, and equipment removal from your property
New System Install & Test
New heat pump installation with electrical integration, refrigerant charging, and performance testing to verify capacity
About This Service
About this Service
Heat pump replacement in Edgewater targets compact residential properties near the Lakewood border where outdoor space is limited. It suits owners of smaller homes seeking efficient heating and cooling without major ductwork changes.
Space constraints often make ductless mini‑split configurations the practical choice; installers plan condenser siting for minimal visual and noise impact on narrow lots. Cold snaps and the dry climate mean systems should have robust low‑temperature defrost performance.
A properly sized mini‑split replacement delivers zoned comfort and lower energy use. Expect careful routing of refrigerant lines and possible permit requirements for exterior condenser placement in compact neighborhoods.
FAQ
Common questions about heat pump replacement in Edgewater
Get answers about replacement costs, timing, and what to expect during the process.
Who We Are
About Lakewood Heat Pumps
If your heating or cooling is failing or costing too much, we help arrange heat pump installations in Lakewood. We route requests to EPA Section 608 and NATE-certified technicians for a site assessment and an itemized quote. The technician performs sizing, installs the system, and completes commissioning and performance testing.
Our Full StoryOur Mission & Values
We exist to make heat pump installation straightforward for Lakewood homeowners and businesses by arranging certified technicians who deliver efficient, reliable heating and cooling systems.
Transparency
Every quote itemized with no hidden fees or surprises
Responsiveness
Same-day response to service requests and inquiries
Locality
Only Lakewood and Denver-area technicians who know Colorado climate
Verification
Performance testing after every install to confirm efficiency