“Had an issue with my furnace, not running correctly and I thought it was short cycling so I called Bear Creek after having another HVAC contractor looked at it. Charge me $150 and didn't really fix the problem. The owner Kevin showed up and was able to identify the issue had a short-term fix until we could get it fixed. Kevin was very knowledgeable and a nice guy and didn't even me for the short term solution. I would strongly recommend him!”
Ground-Source Geothermal Heat Pumps in Belmar, Colorado
- EPA Section 608 Certified
Technicians certified in refrigerant handling and ground loop installation
- Horizontal & Vertical Loops
Loop configurations matched to your property's available space and soil
- Performance Testing Verified
Loop flow rates and refrigerant charge tested after install for efficiency
“Where can I start? Kevin is extremely responsive and knowledgeable. Prices are also reasonable for the quality of work performed. I had an emergency leak in my basement today (had a flight to catch in a couple of hours) and denver water was taking too long to shut the water off in the house. Kevin took time out of his day off to stop by my house and temporarily fix the leak so I could make my flight later that day! The professionalism is unmatched! I will be using Kevin and his team on all sorts of projects going forward. Can’t recommend highly enough!”
“Kevin and his team came into my old moutain home and helped me install a new tankless water heater and a new furnace. They ran into all sorts of unknowns at the house, my well line started leaking into basement and it was just the tip of the iceberg. Kevin stayed numerous days helping me fight problems that were not even part of his installation. He is one who you can say will have your back through thick n thin! He sticks to what he says, where most people would try to stick it to you for unseen work.. His instalation was very thorough and he made sure I was happy before he left. l sure appreciate you helping me fight the fight with courage and leadership. Thank you Kevin and Team A+++”
What We Do
Geothermal heat pumps that help Belmar homeowners achieve the lowest heating and cooling costs available
Covering ground loop excavation, horizontal or vertical loop installation, heat pump connection, refrigerant charging, and performance testing to verify efficient operation.
Ground Loop Installation
Excavation and installation of horizontal or vertical ground loops sized for your property's heating load and available space
Geothermal System Repair
Pressure testing, leak detection, and repair of ground loops and heat pump components with efficiency verification
Why Us
Ground loop systems sized for your property and tested for efficiency
Geothermal systems deliver the highest efficiency, but only when ground loops are sized correctly and installed with proper flow rates. Undersized loops or poor refrigerant charge waste the investment.
Common Challenges
High upfront excavation cost scares off
Ground loop installation requires excavation that adds thousands to upfront cost
Long install time disrupts your yard
Digging horizontal or vertical loops takes days and leaves your property torn up
Ground loop leaks are hard to locate
Buried loops that develop leaks require excavation to find and repair the damage
How We Help
300-400% efficiency rating year-round
Ground temps stay 50-60°F year-round, delivering 3-4 units of heat per unit of electricity consumed
Lowest operating costs of any system
Stable ground temps eliminate the efficiency loss air source systems face in extreme weather
Loop systems last 50+ years buried
High-density polyethylene loops resist corrosion and outlast the heat pump unit itself
No outdoor unit exposed to weather
Ground loop eliminates the outdoor condenser, reducing noise and weather damage risk
Federal tax credits reduce upfront cost
30% federal tax credit on geothermal installation offsets excavation and loop expenses
300-400% efficiency rating year-round
Ground temps stay 50-60°F year-round, delivering 3-4 units of heat per unit of electricity consumed
Lowest operating costs of any system
Stable ground temps eliminate the efficiency loss air source systems face in extreme weather
Loop systems last 50+ years buried
High-density polyethylene loops resist corrosion and outlast the heat pump unit itself
No outdoor unit exposed to weather
Ground loop eliminates the outdoor condenser, reducing noise and weather damage risk
Federal tax credits reduce upfront cost
30% federal tax credit on geothermal installation offsets excavation and loop expenses
Who We Help
Belmar property owners planning long-term energy savings
Geothermal systems make sense for new construction, major renovations, or properties with space for ground loops and a long ownership timeline.
Homeowners Planning New Construction
Building new in Belmar's mixed-use residential areas with excavation already scheduled for foundation work
Property Owners with Large Lots
Owners with adequate yard space for horizontal ground loops on urban flatland sites
Long-Term Homeowners Seeking Lowest Bills
Homeowners planning to stay 10+ years who want the lowest operating costs available
How We Work
How Geothermal Installation Works
We arrange EPA Section 608 certified technicians to size ground loops for your property, excavate and install the system, and test performance to verify efficiency.
Site Assessment & Loop Sizing
Technician evaluates your property's available space, soil conditions, and heating load to determine horizontal or vertical loop configuration and sizing
Excavation & Loop Installation
Ground loops are buried at proper depth with correct spacing, pressure tested for leaks, and connected to the indoor heat pump unit
Commissioning & Testing
Refrigerant charge is verified, loop flow rates are tested, and system performance is measured to confirm efficiency ratings
About This Service
About this Service
Geothermal heat pumps in Belmar install ground loop systems that use stable subsurface temperatures to heat and cool mixed-use residential properties in central Lakewood. They suit owners of new mixed-use buildings or townhomes that can provide subsurface access for loops.
Urban flatland and mesa elevation in Belmar generally simplify rig access, but many mixed-use lots lack room for horizontal loops; vertical boreholes are common and increase drilling time and cost. Installers will size ground loops to the building load and plan street or alley access for drilling equipment.
The expected outcome is the highest seasonal efficiency and lower operating cost compared with air-source systems, at the expense of larger upfront excavation and longer install schedules; performance commissioning includes loop pressure testing and flow-rate verification before handover.
FAQ
Common Questions About Geothermal Heat Pumps in Belmar
Answers to help you decide if geothermal makes sense for your property and budget.
Who We Are
About Lakewood Heat Pumps
If your heating or cooling is failing or costing too much, we help arrange heat pump installations in Lakewood. We route requests to EPA Section 608 and NATE-certified technicians for a site assessment and an itemized quote. The technician performs sizing, installs the system, and completes commissioning and performance testing.
Our Full StoryOur Mission & Values
We exist to make heat pump installation straightforward for Lakewood homeowners and businesses by arranging certified technicians who deliver efficient, reliable heating and cooling systems.
Transparency
Every quote itemized with no hidden fees or surprises
Responsiveness
Same-day response to service requests and inquiries
Locality
Only Lakewood and Denver-area technicians who know Colorado climate
Verification
Performance testing after every install to confirm efficiency