---
title: "Heat Pump Replacement in Lakewood | Lakewood Heat Pumps"
description: "Choosing the wrong system size or skipping a load calculation costs money every month. We arrange a local heat pump inst"
canonical: "https://www.lakewoodheatpumps.com/services/heat-pump-replacement"
lastmod: "2026-11-15T10:04:32.711Z"
---

# Heat Pump Replacement in Lakewood

![An outdoor electrical standby generator sits next to a white brick wall, with an excavator bucket and a shovel digging in the soil around its base.](https://utmost-ibex-736.convex.cloud/api/storage/6ee2f1f2-bec5-4809-870d-bbde962eb7f0)

Stop patching a failing system, get correctly sized, fully installed equipment that handles both seasons.

- **Written Estimate First**: Itemised scope covers equipment, installation, and timeline before you commit.
- **Altitude-Adjusted Sizing**: Load calculation accounts for Colorado elevation and temperature swings.
- **Post-Install Check**: Pressures and airflow are verified before the job is signed off.
- **On-Site Assessments**: We schedule the on-site assessment and the work for your property.

## Why some replacements repeat the same comfort problems

Swapping the outdoor unit without checking the rest of the system is the most common reason a new heat pump underperforms from day one.

- **Wrong Tonnage Again**: Matching the old unit’s tonnage copies any original sizing error, leaving the home under- or over-conditioned in both seasons.
  **Manual J Calculation**: A fresh load calculation sets the correct tonnage for the home’s actual square footage, insulation, and Colorado altitude.
- **Aged Coil Left In**: Pairing a new condenser with an old evaporator coil cuts efficiency and can void the equipment manufacturer’s warranty immediately.
  **Full System Assessment**: The indoor air handler, evaporator coil, and copper line set are all evaluated before the replacement scope is written.
- **Leaky Ducts Ignored**: Pressure losses in an uninspected duct system starve the new equipment of airflow and recreate the same uneven room temperatures.
  **Duct Pressure Test**: The existing duct system is pressure-tested to confirm it can carry the new system’s airflow before equipment is ordered.
- **Panel Capacity Missed**: An undersized breaker or shared circuit causes nuisance trips and can damage the new equipment within the first heating season.
  **Electrical Panel Check**: Breaker capacity and dedicated circuit availability are confirmed before installation begins, not discovered mid-job.

## What the replacement covers beyond the outdoor unit

A full swap addresses every component that affects how the new system performs, not just the condenser sitting outside.

- **System Sizing Check**: A Manual J load calculation confirms correct tonnage so the new system is not a copy of a unit that may have been wrongly sized.
- **Outdoor Condenser & Air Handler Swap**: Both the outdoor condenser and indoor air handler are replaced together to ensure matched efficiency ratings and warranty compliance.
- **Evaporator Coil & Line Set Review**: The evaporator coil and copper line set are assessed and replaced where needed to protect the new equipment’s rated output.
- **Ductwork Inspection**: Existing ducts are inspected and pressure-tested to confirm they can carry the new system’s airflow without comfort-robbing losses.
- **Electrical Readiness Check**: The electrical panel is checked for correct breaker capacity and a dedicated circuit before the written scope is finalised.
- **Refrigerant Charge & Startup Test**: After installation, the refrigerant charge is set and a startup test verifies pressures and airflow before the job is closed.

- **Thermostat Replacement**: Old thermostats swapped for a compatible new unit.
- **Auxiliary Heat Sizing**: Heat strip sized for coldest nights without overshooting.
- **Old Equipment Removal**: Existing outdoor and indoor units removed after startup.

## What a full heat pump replacement involves beyond the outdoor unit

Replacing a heat pump correctly means checking sizing, ductwork, and electrical capacity before the new system is ordered.

A heat pump replacement is not just an outdoor unit swap. The indoor air handler, evaporator coil, and copper line set are assessed at the same time, because pairing a new condenser with an aged coil or undersized line set limits efficiency and can void the equipment warranty. Lakewood homes run heat pumps in both heating and cooling seasons, which accelerates wear and means end-of-life symptoms often appear in both modes before a failure occurs.

Sizing is recalculated using a Manual J load calculation rather than matching the old unit’s tonnage. An incorrectly sized original system is a common reason for comfort complaints that persist after replacement. Colorado’s altitude and wide day-night temperature swings affect the calculation, and the auxiliary heat strip is sized alongside the main system to cover the coldest nights without overshooting the heating load.

The existing duct system is pressure-tested to confirm it can carry the new system’s airflow. The electrical panel is checked for the correct breaker capacity and a dedicated circuit. After the new outdoor condenser, air handler, and thermostat are installed and the refrigerant charge is set, a startup test verifies pressures and airflow before the job is signed off and old equipment is removed.

[Request an Assessment](https://www.lakewoodheatpumps.com/contact)

## Why Lakewood Heat Pumps for your replacement?

Every replacement enquiry follows the same structured process so nothing is missed and the written scope reflects the full job.

- **Written Scope Before You Commit**: You receive an itemised estimate covering equipment, installation scope, and timeline before any work is booked.
- **Altitude-Adjusted Load Calculation**: Sizing accounts for Colorado Front Range elevation and temperature swings, not just the old unit’s nameplate tonnage.
- **Full System Evaluation on Every Job**: Each enquiry starts with a condition check on existing equipment so the written scope reflects the actual replacement needed.
- **Post-Install Performance Check**: A startup test confirms refrigerant pressures and airflow meet spec before the installer leaves and the job is closed.
- **On-Site Assessments**: We schedule assessments built around Lakewood-area homes and the conditions that affect system performance here.

## From first enquiry to a running system

1. **Request an Assessment**: Tell us about your existing system and home, and we schedule an evaluation of the property and existing equipment.
2. **Review Your Written Scope**: You receive an itemised estimate covering equipment, ductwork findings, electrical requirements, and the full installation timeline.
3. **Install & Confirm Performance**: The installer completes the swap, sets the refrigerant charge, and runs a startup test to verify pressures and airflow before sign-off.

[Request an Assessment](https://www.lakewoodheatpumps.com/contact)

## Typical Heat Pump Replacement Prices

| Replacement type | Typical cost | Typical duration |
| --- | --- | --- |
| Straight heat pump replacement | $10,000-$16,000 | 1-2 days |
| Ducted replacement project | $12,000-$18,000 | 1-2 days |
| Full system replacement with upgrades | $15,000-$25,000 | 2-4 days |

These prices are estimates and often vary with the condition, size and scope of each job. Message or call us for a free, no-obligation quote.

[See all prices](https://www.lakewoodheatpumps.com/pricing)

## Questions homeowners ask before replacing a heat pump

### How much does a heat pump replacement usually cost?

Guide prices run from $10,000-$16,000 (Straight heat pump replacement) to $15,000-$25,000 (Full system replacement with upgrades). Air-source units typically sit at the lower end; geothermal systems run higher due to ground loop work. A written itemised estimate is provided before any work is booked.

### What makes the final price of a heat pump replacement go up or down?

System type, output capacity, duct condition, and altitude-adjusted sizing all shift the final figure. A geothermal system costs more than an air-source unit of the same capacity. Replacing deteriorated ductwork or upgrading the electrical panel at the same time adds to the total. The written estimate breaks each item out separately.

### Should I replace my heat pump now or keep repairing it?

Replace when repair costs exceed roughly half the price of a new unit, or when the system is over 15 years old and failing repeatedly. Continuing to repair an aging unit means paying for parts and labor while efficiency keeps dropping. A system evaluation will show whether the existing equipment is worth further investment.

### Would another repair buy me enough time, or am I better off replacing it now?

A repair makes sense if the unit is under 10 years old and the fault is isolated. If the compressor is failing, refrigerant is leaking repeatedly, or the system can no longer meet your heating or cooling load, another repair delays the inevitable and adds cost. An inspection will clarify which situation you are in. [See heat pump repair options](https://www.lakewoodheatpumps.com/services/heat-pump-repair)

### Is a heat pump replacement right for my home if I already have ductwork?

Yes, existing ductwork makes a ducted air-source replacement straightforward in most cases. Duct condition and sizing are assessed as part of the evaluation to confirm airflow meets the new unit’s requirements. Homes with sound, properly sized ducts typically see the simplest and most cost-effective replacement process.

### Do I need to replace my ducts too, or can the new unit work with what I have?

In many cases the existing ducts are fine. The evaluation checks for leaks, undersized runs, and airflow restrictions that would reduce the new system’s output. If ducts are significantly leaky or undersized, replacing them alongside the unit avoids efficiency losses and comfort complaints after installation.

### How do I know if my heat pump is failing or just needs a repair?

Signs that point toward replacement rather than repair include a compressor that cycles off under load, refrigerant leaks that recur within a season, ice buildup that defrost cycles cannot clear, and heating or cooling output that no longer matches your thermostat setting. A single isolated fault on a younger system usually warrants repair first. [Book an inspection](https://www.lakewoodheatpumps.com/services/heat-pump-inspection)

### Why is my heat pump not heating or cooling like it should?

The most common causes are a refrigerant charge that has dropped due to a leak, a failing compressor, a dirty or blocked coil, or a reversing valve stuck in one mode. At Lakewood’s altitude, an undersized unit also struggles on peak demand days. A diagnostic visit will identify the specific fault before any parts are ordered.

### Which areas do you cover for Heat Pump Replacement?

We cover Heat Pump Replacement in and around Lakewood, including Arvada, Colorado, Bear Creek, Colorado, Belmar, Colorado, Edgewater, Colorado, Golden, Colorado, Denver, Colorado, Wheat Ridge, Colorado, Littleton, Colorado, Morrison, Colorado, Ken Caryl, Colorado and Columbine, Colorado. If your area isn’t listed, [send us a quick message](https://www.lakewoodheatpumps.com/contact) to check.

## Get a Written Scope for Your Replacement

Describe your existing system and we’ll schedule an on-site assessment, run a load calculation, and put the full replacement scope in writing before anything is booked.

[Request an Assessment](https://www.lakewoodheatpumps.com/contact)

## Business details

### Contact

- **Phone**: [1 720-936-7533](tel:1720-936-7533)
- **Email**: [contact@lakewoodheatpumps.com](mailto:contact@lakewoodheatpumps.com)
- **Based in**: Lakewood, CO, 80214
- **Enquiries**: [Send an enquiry](https://www.lakewoodheatpumps.com/contact) — We ask for your name, phone number, email and a message.

### Opening hours

- **Monday**: 08:00 – 18:00
- **Tuesday**: 08:00 – 18:00
- **Wednesday**: 08:00 – 18:00
- **Thursday**: 08:00 – 18:00
- **Friday**: 08:00 – 18:00
- **Saturday**: 10:00 – 16:00
- **Sunday**: 10:00 – 16:00
