---
title: "Air Source Heat Pumps in Lakewood | Lakewood Heat Pumps"
description: "Choosing the wrong system size or skipping a load calculation costs money every month. We arrange a local heat pump inst"
canonical: "https://www.lakewoodheatpumps.com/services/air-source-heat-pumps"
lastmod: "2026-11-15T10:04:32.711Z"
---

# Air Source Heat Pumps in Lakewood

![An air source heat pump unit installed on the exterior wall of a modern brick building below a window.](https://utmost-ibex-736.convex.cloud/api/storage/0fc7f8d9-cb11-47fe-9976-c5ad1f79a43c)

One system replaces your furnace and AC, sized for Colorado winters with a written scope before anything is booked.

- **Load Calculation First**: Altitude-adjusted sizing before any equipment is recommended.
- **Written Estimate**: Equipment, scope, and timeline in writing before you commit.
- **Post-Install Check**: System output confirmed before the job is signed off.
- **On-Site Assessments**: We schedule an on-site assessment of your property.

## Where rushed heat pump installs fall short

Skipping key steps at the start creates performance problems that show up every winter.

- **Undersized Aux Heat**: A heat strip sized by guesswork leaves the system short on output when Colorado temperatures drop below 20°F.
  **Load-Calculated Strip Size**: A full Manual J load calculation sets the auxiliary heat strip size to cover the actual worst-case heating demand.
- **Leaky Duct Losses**: Connecting a new air handler to unsealed ducts bleeds conditioned air into wall cavities, cutting delivered efficiency by 20-30%.
  **Duct Inspection First**: A duct inspection before installation confirms sizing and sealing, so the system delivers its rated airflow at every register.
- **Wrong Refrigerant Charge**: An incorrect refrigerant charge at startup forces the compressor to work harder, shortening its lifespan and raising running costs.
  **Pressure-Checked Startup**: A refrigerant pressure check during startup confirms the charge is within the manufacturer’s specified range before the job closes.
- **Thermostat Mismatch**: A standard furnace thermostat wired to a heat pump can trigger the auxiliary strip unnecessarily, adding hundreds of dollars to winter bills.
  **Heat Pump Thermostat Setup**: The thermostat is confirmed compatible with heat pump staging and auxiliary lockout before the system is commissioned.

## What a ducted air source heat pump install covers

From the outdoor condenser to the final airflow check, here is what the full installation includes.

- **Outdoor Condenser Installation**: The condenser is set on a level pad, connected to the refrigerant line set, and wired to the electrical disconnect.
- **Air Handler & Coil Setup**: The indoor air handler replaces the existing furnace or coil cabinet and connects to the existing duct system.
- **Auxiliary Heat Strip Sizing**: The backup heat strip is sized from the load calculation to cover Colorado’s coldest design temperatures.
- **Duct Inspection & Sealing**: Existing ductwork is inspected for leaks, sizing gaps, and pressure losses before the new system is connected.
- **Refrigerant Line Set & Charge**: Copper line set is run between units, then the system is charged and pressure-checked to the manufacturer’s specification.
- **Startup & System Balancing**: Airflow at each register, refrigerant pressure, and thermostat staging are all verified during the final commissioning check.

- **Heat Pump Replacement**: Swap an aging heat pump for a current-efficiency model.
- **Furnace & AC Conversion**: Replace separate heating and cooling with one ducted system.
- **Thermostat Upgrade**: Install a heat-pump-compatible smart thermostat.
- **Duct Repair & Sealing**: Seal and resize ducts ahead of the new system install.

## How an air source heat pump heats and cools your home

One system handles both seasons by moving heat rather than generating it, using your existing ductwork.

An air source heat pump moves heat between the outdoor condenser and the indoor air handler through a refrigerant line set. A reversing valve switches the flow direction, so the same system heats in winter and cools in summer. For Lakewood homes with existing forced-air ductwork, this is often a direct swap for a separate furnace and central AC.

Colorado winters can push outdoor temperatures low enough that an auxiliary heat strip is needed to cover the gap. Sizing that strip correctly requires a full load calculation, not a rule-of-thumb estimate. Older Lakewood homes may also need a duct inspection before installation to confirm the system can deliver the rated airflow without pressure losses.

After the outdoor unit is set and the refrigerant line set is connected, the system is charged and balanced. A startup test measures refrigerant pressure, airflow at each register, and thermostat response. The post-install check confirms the system runs at its rated output before the job is signed off.

[Request an Assessment](https://www.lakewoodheatpumps.com/contact)

## Why Lakewood Heat Pumps for your air source install?

Every step from first contact to post-install check is structured to protect you from surprises.

- **Written Scope Before You Commit**: You receive an itemised estimate covering equipment, installation scope, and timeline before any booking is made.
- **Altitude-Adjusted Sizing Review**: Every enquiry includes a sizing review that accounts for Colorado Front Range elevation, not a sea-level default.
- **On-Site Assessments**: The written estimate names the contractor, so you can confirm their credentials and insurance for work in Lakewood before signing.
- **Post-Install Performance Check**: The installer confirms refrigerant pressure, register airflow, and thermostat staging before the job is closed out.
- **15-20 Year System Lifespan**: Correct installation and commissioning are the biggest factors in reaching the upper end of a heat pump’s service life.

## From first contact to a running system

1. **Submit Your Details**: Tell us your home size, current heating setup, and duct condition so we can schedule the right assessment for your property.
2. **Receive a Written Scope**: The installer runs a load calculation and duct inspection, then delivers an itemised estimate covering equipment, labor, and timeline.
3. **Install & Commission**: The system is installed, charged to spec, and balanced, with a startup check confirming output at every register before sign-off.

[Request an Assessment](https://www.lakewoodheatpumps.com/contact)

## Typical Air Source Heat Pumps Prices

| System type | Typical installed cost | Typical setup |
| --- | --- | --- |
| Single-zone system | $3,500-$5,500 | 1 room |
| Two-zone system | $4,500-$8,000 | 2 rooms |
| Three-zone system | $6,500-$11,000 | 3 rooms |
| Whole-home multi-zone system | $12,000-$26,000 | 4 or more zones |
| Ducted replacement system | $12,000-$18,000 | Whole home |

These prices are estimates and often vary with the condition, size and scope of each job. Message or call us for a free, no-obligation quote.

[See all prices](https://www.lakewoodheatpumps.com/pricing)

## Questions homeowners ask before getting a heat pump

### How much does it cost to install an air source heat pump in my house?

Guide prices run from $3,500-$5,500 (Single-zone system) to $12,000-$26,000 (Whole-home multi-zone system). A system evaluation covering load, equipment condition, and altitude-adjusted sizing is done first, followed by an itemised written estimate before any work is booked.

### What changes can make the install cost go up?

Ductwork that needs sealing, resizing, or full replacement adds the most to the total. Electrical panel upgrades, difficult outdoor unit placement, and altitude-adjusted equipment sizing for higher-elevation homes in this area can also increase the scope. The written estimate covers all of these line items before work begins.

### Will my existing ducts work with a ducted air source heat pump?

Existing ducts often work, but they need to be checked for leaks, adequate sizing, and insulation before a heat pump is connected. Heat pumps move air at lower temperatures than furnaces, so undersized or leaky ducts reduce efficiency noticeably. The system evaluation includes an assessment of your existing ductwork as part of the load and equipment review.

### Can I get an air source heat pump if my house does not have ducts?

Yes. A ductless mini-split system delivers heating and cooling without any ductwork by mounting compact air handlers directly in each room or zone. It is often the most practical route for homes without existing ducts. You can learn more on the [mini-split heat pumps](https://www.lakewoodheatpumps.com/services/mini-split-heat-pumps) page.

### Will it heat my house well in cold weather?

Modern cold-climate air source heat pumps maintain full heating output down to around 5 degrees Fahrenheit, and most continue operating below that. Performance does drop as temperatures fall, so correct sizing for your home’s heat loss at local winter lows is critical. The altitude-adjusted load calculation done during the evaluation accounts for Lakewood’s climate conditions.

### Is an air source heat pump worth it for my home?

For most homes with adequate insulation and compatible electrical service, a heat pump lowers heating costs because it moves heat rather than generating it, typically delivering two to three units of heat per unit of electricity consumed. The upfront cost is higher than a furnace replacement, but operating costs are lower over time. The written estimate lets you compare the numbers for your specific home.

### Should I replace my furnace and AC or switch to a heat pump?

If both your furnace and AC are near end of life, replacing them with a single heat pump system often costs less than buying two separate units and avoids two future replacement cycles. A heat pump also reduces gas consumption, which matters if gas prices rise. The system evaluation compares your current equipment condition against a heat pump scope before you commit.

### What is the downside of an air source heat pump?

The upfront equipment and installation cost is higher than a furnace or AC alone. Heating output decreases as outdoor temperatures drop below about 5 degrees Fahrenheit, so very cold nights may require a backup heat source in some homes. Electrical service upgrades are sometimes needed, which adds to the project scope and cost.

### Which areas do you cover for Air Source Heat Pumps?

We cover Air Source Heat Pumps in and around Lakewood, including Arvada, Colorado, Bear Creek, Colorado, Belmar, Colorado, Edgewater, Colorado, Golden, Colorado, Denver, Colorado, Wheat Ridge, Colorado, Littleton, Colorado, Morrison, Colorado, Ken Caryl, Colorado and Columbine, Colorado. If your area isn’t listed, [send us a quick message](https://www.lakewoodheatpumps.com/contact) to check.

## One System for Heating & Cooling in Lakewood

Tell us about your home and we’ll schedule a load calculation, duct inspection, and put the full scope in writing before anything is booked.

[Request an Assessment](https://www.lakewoodheatpumps.com/contact)

## Business details

### Contact

- **Phone**: [1 720-936-7533](tel:1720-936-7533)
- **Email**: [contact@lakewoodheatpumps.com](mailto:contact@lakewoodheatpumps.com)
- **Based in**: Lakewood, CO, 80214
- **Enquiries**: [Send an enquiry](https://www.lakewoodheatpumps.com/contact) — We ask for your name, phone number, email and a message.

### Opening hours

- **Monday**: 08:00 – 18:00
- **Tuesday**: 08:00 – 18:00
- **Wednesday**: 08:00 – 18:00
- **Thursday**: 08:00 – 18:00
- **Friday**: 08:00 – 18:00
- **Saturday**: 10:00 – 16:00
- **Sunday**: 10:00 – 16:00
